smd semi shielded power chip inductor 15 rdc allied part number inductance ( h) tolerance (%) test freq. allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 04/22/13 mhz, 200mv all specifications subject to change without notice. irms pcfv42-3r3m-rc 3.3 20 1 .072 1.68 features ? semi magnetically shielded electrical test equipment physical packaging: 1000 per tape and reel ? high current inductance range: 3.3h ~ 10h (other tolerance: available in 20% operating temp: -40oc ~ +125oc isat: current at which the inductance will drop resistance to soldering heat pre-heat 150oc, 1 min. solder temp: 260oc +/- 5oc for 10 sec (l): hp4287a + hp16197a (rdc): chroma milliohm meter 16502 current: hp4284a + hp42841a marking: eia inductance code pcfv42 isat 1.21 irms: based on a temp rise of t = 40oc solder composition: sn/ag3.0/cu0.5 values being added) by no more then 30% of its initial value. PCFV42-100M-RC 10 20 1 .195 0.96 0.60 ? typical above ambient temp. 30% marking 3r3 100 ? low dc resistence (max) (max) ? ultra low profile, 1.2mm (a) (a) (m) inductance vs. dc current 0 2 4 6 8 10 12 0 0. 51 1.5 2 2.5 3 dc curren t( a) l(uh) 3r3 100 tem perature change vs. dc current 0 10 20 30 40 50 60 70 0 0.5 1 1.5 2 2.5 3 dc curren t( a) t( ) 3r 3 100 dimensions: inches (mm) recommended pattern .158.008 (4.00.20) .158.008 (4.00.20) .06 (1.5) .048.004 (1.20.1) .06 (1.5) .06 (1.5) .17 (4.2) .05 (1.2) magnetic resin xxx
|